These online manuals describe the hardware products sold by Invisible Software. Each manual is supplied in Portable Document Format, and is zipped to reduce the download time. To read the manual, you need an Acrobat Reader. Please visit Adobe's Web page to download a free copy of Acrobat Reader.

Most hardware manuals include board diagrams, jumper settings, specifications, and identifying characteristics.

If you need further help figuring out what type of network board you have, visit our support FAQ section and check out the hardware FAQs.

NE-2000 Compatible Ethernet Adapter Manuals

Invisible Ethernet 2000/EN-3360 -- Jumper settings for the Invisible Ethernet 2000/EN-3360 adapters. These are NE-2000 compatible Ethernet adapters. They can be identified by the presence of the characters "EN3360" printed on the front of the board. (EN3360.ZIP, 326K, 7 pages.)

Invisible Ethernet 2000T/EP-16T -- Jumper settings for the Invisible Ethernet 2000T/EP-16T adapters. These are NE-2000 compatible twisted-pair Ethernet adapters. They can be identified by the presence of two large square chips, one marked with the part number "EN5001", and the other marked with the part number "EN5090" or "W89C90". (EP16T.ZIP, 180K, 7 pages.)

Invisible Ethernet 2000/V2.3 -- Jumper settings for the Invisible Ethernet 2000A/V2.3 adapters and 2000C/V2.3 adapters. These are NE-2000 compatible Ethernet adapters. They can be identified by the presence of the characters "2000A V2.3" or "2000C V2.3" (or just "2000A" or "2000C") printed on the front of the board, and the presence of jumpers labeled "J10" and "J11" in the lower right corner. (2000V23.ZIP, 166K, 3 pages.)

Invisible Ethernet 2000/V2.4 -- Jumper settings for the Invisible Ethernet 2000A/V2.4 adapters, 2000C/V2.4 adapters, 2000T/V2.4 adapters, and Combo 2000 adapters. These are NE-2000 compatible Ethernet adapters. They can be identified by the presence of the characters "V2.4" or "VER2.4" printed on the front of the board, the presence of a jumper labeled "JP1" immediately to the left of the ROM socket, and the presence of jumpers labeled "JP3" and "JP4" immediately to the right of the ROM socket. (2000V24.ZIP, 620K, 14 pages.)

Invisible Ethernet 2000/V3.X -- Jumper settings for the Invisible Ethernet 2000A/V3.X adapters, 2000C/V3.X adapters, and 2000T/V3.X adapters. These are NE-2000 compatible Ethernet adapters. They can be identified by the presence of the characters "VER3.0", "VER3.1", or "VER3.2" printed on the front of the board, the presence of jumpers labeled "ROM BASE", "MODE", and "I/O BASE" on the left edge of the board. (2000V3X.ZIP, 539K, 15 pages.)

Invisible Ethernet 2000/FD -- Jumper settings for the Invisible Ethernet 2000A/FD adapters and 2000C/FD adapters. These are NE-2000 compatible Ethernet adapters. They can be identified by the presence of the characters "510-10002-000 Ether 16 V2.3" printed on the front of the board. (2000FD.ZIP, 258K, 5 pages.)

Invisible Ethernet 2000/LC -- Jumper settings for the Invisible Ethernet 2000A/LC adapters and 2000C/LC adapters. These are NE-2000 compatible Ethernet adapters. They can be identified by the presence of two jumpers at the top center of the board, one labeled "MODE 0" and MODE 1", and the other labeled "BNC" and "TP". (2000LC.ZIP, 237K, 8 pages.)

Invisible Ethernet 2000S -- Specifications for the Invisible Ethernet 2000S/V1 adapters and 2000S/V2 adapters. These are jumperless adapters that can be configured to be either NE-2000 compatible or WD-8013 compatible. They can be identified by the presence of a large controller chip marked with the part number "DP83905" or "W89C905". (2000S.ZIP, 159K, 2 pages.)

Invisible Ethernet 2000J -- Specifications for the Invisible Ethernet 2000JA adapters, 2000JC adapters, and 2000JT adapters. These are jumperless adapters that are NE-2000 compatible. They can be identified by the presence of a bar code on the back of the board that begins with the characters "2000J". (2000J.ZIP, 105K, 2 pages.)

Invisible Ethernet 2000R -- Jumper settings for the Invisible Ethernet 2000RA adapters and 2000RC adapters. These are NE-2000 compatible Ethernet adapters, configurable with software or jumpers. They can be identified by the presence of a bar code on the back of the board that begins with the characters "2000R" or "NE2000R". (2000R.ZIP, 322K, 9 pages.)

Invisible Ethernet 2000PX/V1 -- Jumper settings for the Invisible Ethernet 2000PXA/V1 adapters and 2000PXC/V1 adapters. These are NE-2000 compatible Ethernet adapters, configurable with software or jumpers. They can be identified by the presence of a bar code on the back of the board that begins with the characters "2000PX", and the presence of jumpers in the upper left corner labeled "PNP", "JPLS", "JPER", "MEM", "I/O", and "IRQ". (2000PXV1.ZIP, 163K, 5 pages.)

Invisible Ethernet 2000PX/V2 -- Jumper settings for the Invisible Ethernet 2000PXA/V2 adapters and 2000PXC/V2 adapters. These are NE-2000 compatible Ethernet adapters, configurable with software or jumpers. They can be identified by the presence of a bar code on the back of the board that begins with the characters "2000PX", and the presence of jumpers in the upper left corner labeled "I/O", "IRQ", "JPR", and "BROM ADDRESS". (2000PXV2.ZIP, 164K, 5 pages.)

Invisible Ethernet 2000PX/PN -- Jumper settings for the Invisible Ethernet 2000PXA/PN adapters. These are NE-2000 compatible Ethernet adapters, configurable with software or jumpers. They can be identified by the presence of the number "2976033303" printed inside the ROM socket, and the presence of jumpers in the upper left corner labeled "PnP", "JUMP", "ROM ADDR", and "IO ADDRESS". (2000PXPN.ZIP, 151K, 3 pages.)

NE-1000 Compatible Ethernet Adapter Manuals

Invisible Ethernet 1000/EN-2360 -- Jumper settings for the Invisible Ethernet 1000/EN-2360 adapters. These are NE-1000 compatible 8-bit Ethernet adapters. They can be identified by the presence of the characters "EN2360" printed on the front of the board. (EN2360.ZIP, 290K, 6 pages.)

Invisible Ethernet 1000T/EP-8T -- Jumper settings for the Invisible Ethernet 1000T/EP-8T adapters. These are NE-1000 compatible 8-bit twisted-pair Ethernet adapters. They can be identified by the presence of two large square chips, one marked with the part number "EN5001", and the other marked with the part number "EN5090" or "W89C90". (EP8T.ZIP, 195K, 7 pages.)

Invisible Ethernet 1000/V2.3 -- Jumper settings for the Invisible Ethernet 1000A/V2.3 adapters and 1000C/V2.3 adapters. These are NE-1000 compatible 8-bit Ethernet adapters. They can be identified by the presence of the characters "1000A V2.3" or "1000C V2.3" (or just "1000A" or "1000C") printed on the front of the board, and the presence of a jumper labeled "J11" in the lower right corner. (1000V23.ZIP, 143K, 2 pages.)

Invisible Ethernet 1000/V2.4 -- Jumper settings for the Invisible Ethernet 1000A/V2.4 adapters, 1000C/V2.4 adapters, 1000T/V2.4 adapters, and Combo 1000 adapters. These are NE-1000 compatible 8-bit Ethernet adapters. They can be identified by the presence of the characters "V2.4" or "VER2.4" printed on the front of the board, and the presence of a jumper labeled "J11" in the center of the right edge. (1000V24.ZIP, 513K, 12 pages.)

ISA Bus Proprietary Ethernet Adapter Manuals

Invisible Ethernet-8 -- Installation manual for the Invisible Ethernet-8 "Series N" network adapters. These old adapters are 8-bit adapters and are not NE-1000 compatible. Includes jumper and switch settings. (ETH8.ZIP, 140K, 52 pages.)

Invisible Ethernet-8 Quick Reference -- Diagram showing Invisible Ethernet-8 adapter layout, jumper settings, and switch settings. These old adapters are 8-bit adapters and are not NE-1000 compatible. (QETH8.ZIP, 95K, 2 pages.)

Invisible Ethernet-16 -- Installation manual for the Invisible Ethernet-16 "Series N" network adapters. These old adapters are 16-bit adapters and are not NE-2000 compatible. Includes jumper and switch settings. (ETH16.ZIP, 144K, 52 pages.)

Invisible Ethernet-16 Quick Reference -- Diagram showing Invisible Ethernet-16 adapter layout, jumper settings, and switch settings. These old adapters are 16-bit adapters and are not NE-2000 compatible. (QETH16.ZIP, 104K, 2 pages.)

Micro Channel Ethernet Adapter Manuals

Invisible Ethernet/A -- Installation manual for the Invisible Ethernet/A network adapters. These old adapters are 16-bit Micro Channel adapters and are not NE/2 compatible. Includes jumper and switch settings. (ETHA.ZIP, 116K, 38 pages.)

Invisible Ethernet 2/A -- Jumper settings for the Invisible Ethernet 2/A adapters and Ethernet 2T/A adapters. These are NE/2 compatible Micro Channel Ethernet adapters. They can be identified by the presence of a large square chip marked with the part number "EN5001". (ETH2A.ZIP, 105K, 2 pages.)

VL Bus Ethernet Adapter Manuals

Invisible Ethernet VL3200 -- Jumper settings for the Invisible Ethernet VL3200 adapters. These are VL-Bus 32-bit Ethernet adapters. (ETHVL.ZIP, 661K, 10 pages.)

PCI Bus Ethernet Adapter Manuals

Invisible Ethernet PCI -- Specifications and setup instructions for the Invisible Ethernet PCI adapters. These are PCI adapters for 10Mbps Ethernet. They can be identified by the presence a large controller chip marked with the part number "21040" or "21041". (ETHPCI.ZIP, 160K, 2 pages.)

Invisible FastX Ethernet PCI -- Specifications and setup instructions for the Invisible FastX Ethernet PCI adapters. These are PCI adapters for 10/100Mbps Ethernet. They can be identified by the presence a large controller chip marked with the part number "21140". (FASTPCI.ZIP, 160K, 2 pages.)

Invisible Network (Non-Ethernet) Adapter Manuals

Invisible Network Models 200 and 300 -- Installation manual for the Invisible Network Models 200 and 300, "Rev B" network adapters. These old adapters run at speeds from 0.7 to 3.0 Mbps, on dual twisted-pair wire. Includes jumper and switch settings. (M300.ZIP, 157K, 52 pages.)

Invisible Network Model 300 Quick Reference -- Diagram showing Model 300 "Rev B" adapter layout, jumper settings, and switch settings. These old adapters run at speeds from 0.7 to 3.0 Mbps, on dual twisted-pair wire. (QM300.ZIP, 60K, 1 page.)

Invisible Network Model 300/A -- Installation manual for the Invisible Network Model 300/A, "Rev B" Micro Channel network adapters. These old adapters run at speeds from 0.7 to 3.0 Mbps, on dual twisted-pair wire. Includes jumper and switch settings. (M300A.ZIP, 127K, 44 pages.)

Other Hardware Manuals

Invisible EMS -- Installation manual for the Invisible EMS expanded memory board. This memory board was useful mainly for 286-based computers running DOS. Includes jumper and switch settings. (EMSMAN.ZIP, 262K, 106 pages.)

Go back to On-Line Manuals.